-
HAEFELY/Tettex
-
HIPOTRONICS
-
DIAEL BlueBox
<
>
- 匝比測試設備 2795/2796/2293
- 局部放電量測系統DDX9161/DDX1912b
- 散逸因數及電力因數量測系統2883/2881G/2823 & 2823REF
- 儀表及控制用變比器量測系統 2767
- 測試用比壓器及比流器4761/4764/3691/3695
- 高壓電力電纜終端設備
- 標準校正設備
4.儀表及控制用變比器量測系統
2767
The 2767 automatic current and voltage transformer test set is a modern, fully automatic instrument for fast, accurate measurement of instrument transformer errors. Increasingly severe quality control requirements call for a higher degree of operating comfort and absolute reliability of the measuring equipment employed. 自動電流和電壓互感器測試儀是一種現代化的全自動儀器,可快速且準確地測量互感器誤差。越來越嚴格要求更高的質量控制及操作舒適度和所用測量設備的絕對可靠性。 |
介電擊穿交流測試機 D149-DIThe D149-DI Series of AC Dielectric Breakdown Testers represents a new level of sophistication, flexibility and accuracy in breakdown voltage testing. Each unit is equipped with a new standard embedded firmware controller that is internally programmed to perform the ASTM D149 short-time test, step-by-step test and slow rate-of-rise test. This unit can also be easily programmed to perform variations of these test sequences. The voltmeter circuit continually samples each waveform to determine the breakdown voltage with the highest accuracy. The operator can control all test parameters as required. When testing is complete, all breakdown information for that series of test samples are automatically recorded. Standard units are available in 30kV, 50kV, 75kV and 100kV AC for a wide variety of applications. Contact the factory for DC or partial discharge testing requirements, and to inquire about modernization of existing systems.
將崩潰電壓測試的靈活性與精準度提升到了新的水平。 此測試機內嵌韌體控制器,可對應ASTM D149介電強度測試。操作人員可以依據需要自行設定所有測試參數。 電壓計連續採樣每個波形以精準的量測擊穿電壓並自動記錄所有測試數據。 標準規格為30kV, 50kV, 75kV與100kVAC,可對應多種應用。 |
直流耐壓測試儀80kV & 40kV 800PL-HDThe 800PL Series Hipot is a modern solution for testing the insulation strength of electrical apparatus. Outfitted with a state-of-the-art digital interface, and extensive safety features, this robust unit ensures simplistic operation, accurate results, and operator safety under all circumstances. And if a longer duty cycle is required, the 880PL-HD model is the perfect solution for your testing needs.
800PL-HD系列直流耐壓測試儀是測試電氣設備絕緣強度的現代解決方案,配備先進的數位介面和各式安全功能,操作簡易、結果準確並確保操作員的安全。 配備高精準度千伏錶-無論附載電流大小,皆能確保量測電壓的精準。 堅固可靠與便攜的800PL-HD是長時間測試的理想解決方案。 |
系列交流電介質測試系統700-DIThe HIPOTRONICS standard line of AC Dielectric Test Systems are designed to perform high voltage AC tests on electrical apparatus in accordance with IEC60, IEEE 4 and IEC 270 and other national test standards. A variety of mechanical configurations are available to suit different installation conditions. Some models can be supplied in mobile versions when it is difficult to move the test object to the test area. AC Dielectric Test Sets are available in a wide range of voltage and power ratings with exceptional reliability, durability and functionality. No matter what your requirement is, HIPOTRONICS has an affordably priced, highly reliable test solution to meet your needs.
對應IEC 60、IEEE 4與IEC 270和其他國際標準測試,擁有優異的可靠度、耐用度與多樣化的測試功能並提供多種電壓與額定功率以供選擇。部份機型提供機動式主機以供檢測難以移動之受測物。 |
數位交流耐壓測試儀 30kV, 60kV, 100kV, & 120kV HVT-DThe HVT-DI AC Hipot is a modern solution for testing insulation strength of electrical apparatus. Outfitted with state-of-the-art digital interface, and extensive safety features, the HVT-DI series ensures simplistic operation, the most accurate results, and operator safety under all circumstances. The HVT-DI series meets ANSI/SIA A92.2 specifications and the 120kV model is specifically designed to test insulating booms on work platforms and bucket trucks.Accurate voltage and current measurements are measured via voltage readings that are taken directly at the output of the high voltage transformer bonnet and current leakage current measurements are taken in the return leg.All controls are self-contained in a rugged and durable enclosure.
HVT-DI交流電耐壓測試儀由手提式數位介面控制單元與高壓升壓器組成,是交流電實地測試的最佳選擇,可供測試包含:高空作業車、雲梯車、真空斷路器、開關設備與其他電子儀器等等。 120kV機型可對應ANSI/SIA A92.2規範;100kV有較高的輸出電流,於50kV時最高可達100mA;而30kV與60kV則對應快速且精準之交流電介質測試。 高壓升壓器與雙電流錶可確保精準的電流與電壓量測,並內建防護電路以避免雜散電流或漏電流影響電流計精準度;安全性方面配備了快速反應保險絲、外部互鎖裝置與緊急停止鈕。 |
無線千伏儀 100kV, 200kV, 300kV, 400kV KVM-W AC/DCThe KVM-W Series AC/DC Wireless Kilovoltmeters is the first of its kind designed to provide exceptional SAFETY through its wireless communication. It is a highly accurate, portable and modern voltage measurement and calibration system. Each model in this series contains a high voltage assembly, measurement device, durable carrying case, and mobile App. The carrying case and battery operation mode make the system completely portable for field testing, while the precision divider assembly and readout device make it suitable for laboratory use. The KVM-W Series products perform multiple measurements including DC, AC Peak, AC RMS, AC Absolute Average, Frequency and Crest Factor measurements. Units are available in 100kV, 200kV and 300kV for a wide variety of applications.
史上第一台可攜式高精準無線高電壓量測與校正系統,使用無線通信大幅提高安全性。KVM-W包含儀器箱、內建電池、精準的分壓器與讀取裝置,並搭配APP使其同時適合實驗室與實地測試使用。可量測數值包含直流、交流峰值、交流有效值、交流絕對平均值、頻率與峰值因數。 標準規格為100kV, 200kV, 300kV與400kV,可對應多種應用。按此處以編輯. |
數位液體介電測試儀 60kV OC60DI OC90DThe OC60-DI is HIPOTRONICS’ modern response for quick and reliable testing of dielectric strength of insulating liquids used in a wide variety of electric apparatus. It is an automatic liquid dielectric breakdown test equipment with user-friendly digital interface capable of testing up to 60kV AC. This product is safe and easy-to-use, making it a rugged, and a reliable tool for years of field and laboratory use. The OC60-DI offers the ability to use pre-programmed worldwide standards in basic mode or create their own tests using custom mode. Test cells are available for ASTM D877, ASTM D1816 and IEC 156 standards. An internal digital kilovoltmeter automatically records the breakdown voltage for each test sample. Each test can be saved into the unit’s internal memory and transferred via USB drive.
精準可靠的測量各種設備中使用的絕緣液體之介電強度。堅固輕便且變於攜帶的設計,確保無論是在現場或實驗室中都可安全順暢的運行。可對應ASTM D877、ASTM D1816與IEC 156測試標準。可使用基本模式進行標準測試,或可以在自定義模式內自行編輯測試。內建數位千伏錶自動記錄每個測試樣本的擊穿電壓,並可透過USB進行資料傳輸。 |
-
測量系統
-
同步系統
<
>
|
1.MS PicoMS Pico測量儀器是台敏捷可監測並解決現場監測局部放電。MS Pico包括最新一代的記錄儀,具有捕獲局部放電並執行完整診斷的能力,並能在不到3分鐘的時間內測量局部放電。
該設備能捕獲局部放電的信號及參考電壓,以獲得頻率和相移的參數。具可使用由用戶配置的可變頻率參考電壓的功能。該系統允許將捕獲的原始信號傳輸到PC,以進行局部放電和參考電壓。通過USB 3.0連接從PC進行設備控制。 MS Pico測量設備主要功能在快速且輕鬆地進行測量,使其成為定期維護和驗收測試的出色工具。 |
2.MS Plus Portable - 局部放電測量表系MS Plus便攜式設備是能在及時或臨時監控服務中測量局部放電的理想解決的儀器。在戶外安裝時能防護等級為IP65的手提箱內的測量電子設備;內部有空間傳輸所有必要的附件,以便能夠捕獲部分放電並進行全面診斷,且允許在不到30分鐘的時間內完成部分放電的測量,監視可將時間延長到幾天後。
該設備允許捕獲部分放電和電壓參考信號,以獲得頻率和相位偏移參數。它具有同步,通過光纖的同步輸入信號或通過強制內部同步來配置的功能。該系統允許將原始的局部放電和參考電壓信號傳輸到中央控制PC(CAS)。設備的控制是通過三個可用端口(1個電氣端口和2個光學端口)中的任何一個,通過乙太網絡連接從伺服器PC進行的。 MS Plus便攜式測量儀設計用於在可用帶寬為100 Mbps的專用網絡中運行。它可以與其他測量系統串聯安裝,以對多個測量點進行監視。 |
Click here to edit.